Product Description:
Copper Sulphate is added to swimming pools in order to act as a steriliser and Disinfectant.
Organic matter in swimming pools, tends to harbour algae, and copper sulphate has the ability to curb the growth of algae. Also, the copper ions dissolved in the water bind to the proteins inside the bacterial cells, thus killing the bacteria.
Copper Sulphate can be used to kill fungi, and most fungi can be killed with only a very low concentration of copper sulphate.
Adding the right amount of Copper Sulphate to a swimming pool is reasonable and will not cause too much harm to the human body. The national standard for Copper Sulphate added to swimming pools is 0.25 to 0.5 mg/litre. Within this limit, Copper Sulphate is safe for humans.
If Copper Sulphate is used, its maximum dosage should not exceed 1.0 mg/litre.
Items | Guaranteed Specification |
CuSO4. 5H2O | 99%Min |
Cu | 25.2% |
Water insoluble | 0.005% Max. |
Ph value | 3.5 – 4.5 |
Cl | 10 ppm Max. |
Ni | 5 ppm Max. |
Cd | 3 ppm Max. |
Pb . | 10 ppm Max |
Fe | 10 ppm Max. |
Ca | 5 ppm Max. |
Zn | 10 ppm Max. |
Co | 10 ppm Max. |
As | 5 ppm Max. |
The Copper Sulphate is widely used in swimming pool purification solutions、hospital disinfection solution、sewage treatment solutions、disinfection solution of fishpond water quality、disinfection solution for animal husbandry、bleaching solution.
Company information
The company's main import and export products include
(1)Organic Raw Materials:It has a wide range of uses, which can be divided into three aspects: first, it is used as a raw material for the production of polymer chemical products, i.e., monomers for polymerisation reactions; second, it is used as a raw material for other organic chemical industries, including fine chemical products; and third, it is used as a solvent, refrigerant, antifreeze, and gas adsorbent. Basic organic chemical industry is the basis for the development of the production of various organic chemical products, is the main component of the modern industrial structure.Our Organic Raw Materials include Industrial Acetate,Hydrocarbon Compounds,etc.
(2)Polymers:Polymerisation is the process by which the repeating units that make up a polymer are linked together by covalent bonds.Polymers can exist in different states depending on the phase, conformation and arrangement of their molecular chains. The two main states are amorphous and crystalline. Polymers usually exist in a semi-crystalline form in which amorphous and crystalline phases coexist.